JustFog replacement coils are the genuine spares for JustFog devices, built with Japanese organic cotton and supplied five to a pack, every one of them set up for a mouth-to-lung draw.
What sets the JustFog coils apart
These are conventional cotton coils rather than mesh, and the Japanese organic cotton carries the character of whatever e-liquid you fill without layering a taste of its own on top. MTL is the whole point of this coil, so anyone used to the tight, cigarette-like inhale gets exactly the sensation they already know.
Japanese organic cotton for a clean, honest flavour
Standard cotton build rather than mesh, tuned for MTL
Five coils per pack, so a replacement is always ready
Two resistances to match how you like to draw
Pack printed COTTON COIL SERIES, with 3.6V-4.6V marked on the coil body
Available resistances and how to choose
1.2ohm — the warmer of the two with the more forward flavour, for anyone who wants the taste front and centre.
1.6ohm — a tighter, calmer MTL draw that uses less e-liquid, and a comfortable pick for long days of use.
Device compatibility
Made specifically for JustFog devices: Q16, Q16 Pro, Q16 C, Q14, S14, G14, C14, P14A and P16A. If your device is on that list the coil was designed for it from the start, so there is no need to gamble on parts that only roughly fit.
Who it suits
JustFog owners who vape MTL day to day and want genuine spares matching the coil their device shipped with. Wet the cotton with e-liquid and let it soak before the first use, and change the coil as soon as the draw or the taste starts to shift.
Order JustFog replacement coils from Sahba Vape. For adult use only.
Type: Replacement coil with Japanese organic cotton, non-mesh
Brand: JustFog
Pack size: 5 coils
Printed on the pack: COTTON COIL SERIES
Printed on the coil body: 3.6V-4.6V
Technical specifications
Coil type: Standard cotton coil (not mesh)
Available resistances: 1.2Ω / 1.6Ω
Voltage range marked on the coil: 3.6V-4.6V
Draw style: Mouth to lung (MTL)
Compatible devices
JustFog Q16
Q16 Pro
Q16 C
Q14
S14
G14
C14
P14A
P16A
Installation and use
Wet the cotton with e-liquid and let it soak before first use
Fit the coil into a compatible device in place of the old one
Replace the coil when the draw or the flavour changes
Storage
Store in a dry place away from heat and direct sunlight
Leave each coil in its original wrapper until it is fitted
Package contents
5 x JustFog replacement coil
The coil decides flavour, vapour and how long the setup stays good. A pod has to match your exact device model — visually similar is not the same as compatible.
Before you order
Model — Confirm the device name and generation. Brands sell different pods for different devices under the same family name.
Resistance — The Ω figure sets the draw: higher resistance suits MTL, lower resistance suits open DTL.
Wattage range — It is printed on the coil itself. Stay inside it and the cotton will not scorch.
Mesh or wire — Mesh heats evenly and generally gives cleaner flavour and a longer life.
Fitting a coil properly
Prime it — Wet the cotton ports with a few drops of e-liquid before fitting.
Let it rest — Fill, then leave it standing for 10 to 15 minutes.
Ramp up — Start at the bottom of the wattage range and climb gradually.
When to replace
Flavour drop — The first signal that a coil is on its way out.
Burnt taste — The cotton is damaged — replace it straight away.
Gurgling or leaking — A sign the coil is no longer wicking properly.
Reviews
There are no reviews yet.