Uwell Caliburn GPP Alpha replacement pods are the empty 3ml refillable pods for the Caliburn GPP series, each built around an integrated AlphaCore mesh coil. Four pods to a pack.
What makes the GPP Alpha pod worth having
The pod ships empty, so you pick the e-liquid yourself. When the flavour starts to fade you swap the pod alone and keep the device exactly as it is.
Integrated AlphaCore mesh coil spreads heat across a wider surface for clearer, steadier flavour
3ml capacity per pod, which means fewer refills across the day
Dual airflow that enters through the pod wrap and feeds both sides
Soft TPU mouthpiece, printed on the box as SOFT TPU MOUTHPIECE
Four pods per pack, so you can dedicate a pod to each e-liquid you run
Available resistances and how to choose
0.4ohm at 19 to 35W. The highest power range in the set and the most vapour.
0.6ohm at 13 to 25W. A middle range that covers most everyday use.
0.9ohm at 9 to 15W. Lower power with a gentler draw on e-liquid and battery.
1.2ohm at 6 to 11W. The lowest power range here, and usually the one paired with higher-strength salt nicotine.
Device compatibility
The box lists the Caliburn GPP series, and the pod also fits the Caliburn G3, G3 Lite, G4, G4 Mini, G4 Pro, G5, G5 Lite, Caliburn Air, KOKO G4 Pro and KOKO G5.
How it differs from the top-fill GPP pod
We stock a second pod for the same series, listed as the Uwell Caliburn GPP top-fill pod. This listing is the Alpha version: a four-pack of empty 3ml pods with the AlphaCore mesh coil in four resistances. Both belong to the GPP family, so choose the pod you want to standardise on.
Who it suits
Anyone running a Caliburn GPP series device who wants genuine spare pods in a pack that actually lasts, and who likes keeping more than one e-liquid ready without rinsing a pod every time.
Order Uwell Caliburn GPP Alpha pods from Sahba Vape, available in Kuwait. For adult use only.
Airflow: Dual airflow entering through the pod wrap and feeding both sides
Mouthpiece: Soft TPU (printed on the box as SOFT TPU MOUTHPIECE)
Compatibility
Uwell Caliburn GPP (compatibility printed on the box)
Caliburn G3 and G3 Lite
Caliburn G4, G4 Mini and G4 Pro
Caliburn G5 and G5 Lite
Caliburn Air
KOKO G4 Pro and KOKO G5
How to use
The pod arrives empty and must be filled before first use
Let the filled pod stand for a short while so the coil saturates fully
Set device power within the wattage range that matches the pod resistance
Replace the pod when the flavour it carries loses definition
Storage
Keep in a dry place away from high temperatures
Keep out of direct sunlight
Leave inside the original packaging until use
Package contents
4 x Caliburn GPP Alpha 3ml refillable pod
The coil decides flavour, vapour and how long the setup stays good. A pod has to match your exact device model — visually similar is not the same as compatible.
Before you order
Model — Confirm the device name and generation. Brands sell different pods for different devices under the same family name.
Resistance — The Ω figure sets the draw: higher resistance suits MTL, lower resistance suits open DTL.
Wattage range — It is printed on the coil itself. Stay inside it and the cotton will not scorch.
Mesh or wire — Mesh heats evenly and generally gives cleaner flavour and a longer life.
Fitting a coil properly
Prime it — Wet the cotton ports with a few drops of e-liquid before fitting.
Let it rest — Fill, then leave it standing for 10 to 15 minutes.
Ramp up — Start at the bottom of the wattage range and climb gradually.
When to replace
Flavour drop — The first signal that a coil is on its way out.
Burnt taste — The cotton is damaged — replace it straight away.
Gurgling or leaking — A sign the coil is no longer wicking properly.
Reviews
There are no reviews yet.