Kiwi Spark replacement pods are the refillable pods made for the Kiwi Spark device. Each pod holds 2ml, carries an integrated mesh coil, and arrives empty so you fill it with the e-liquid you want.
What makes the Kiwi Spark pod worth it
The mesh coil inside the pod spreads heat over a wider area than a conventional coil, so flavour detail comes through clearly from the first puff to the last refill.
Integrated mesh coil for even heat and steady flavour
2ml capacity per pod
Refillable more than once, so you are never tied to a single flavour
Ships empty, which means you choose the e-liquid and the nicotine strength
Seats into the device in one motion, no tools involved
The two available resistances
0.8ohm gives a warmer, denser draw with more vapour. Take this one if you want flavour and vapour up front.
1.2ohm keeps a tighter MTL draw that sits closer to the traditional feel. Take this one if a restricted inhale is what you are used to.
How to use it
Fill the pod, then let it stand for a few minutes before the first puff so the coil saturates properly. That single step is what protects you from a burnt taste on the first draw. Once flavour dulls or turns harsh, swap the pod for a fresh one.
Device compatibility
Confirmed compatibility is the Kiwi Spark device. Check your model before ordering, since Kiwi pods differ from one model to the next.
Who it suits
Kiwi Spark owners who want a spare pod on hand for a quick swap, and anyone who likes running more than one e-liquid at a time without rinsing a pod in between. It also suits vapers who want to try both resistances side by side before settling on one, or who prefer to have pods prepped before travelling.
Order Kiwi Spark replacement pods from Sahba Vape, available in Kuwait. For adult use only.
Draw style: 0.8Ω warmer and denser / 1.2Ω tighter MTL
Refilling: The pod can be refilled with e-liquid more than once
Compatibility
Kiwi Spark device
How to use
Fill the pod with e-liquid before use
Leave the pod for several minutes after filling so the coil saturates
Seat the pod into the device without tools
Replace the pod when the flavour changes or a burnt note appears
Storage
Keep in a dry place away from high temperatures
Keep out of direct sunlight
Leave inside the original packaging until use
Package contents
3 x Kiwi Spark 2ml refillable pods
The coil decides flavour, vapour and how long the setup stays good. A pod has to match your exact device model — visually similar is not the same as compatible.
Before you order
Model — Confirm the device name and generation. Brands sell different pods for different devices under the same family name.
Resistance — The Ω figure sets the draw: higher resistance suits MTL, lower resistance suits open DTL.
Wattage range — It is printed on the coil itself. Stay inside it and the cotton will not scorch.
Mesh or wire — Mesh heats evenly and generally gives cleaner flavour and a longer life.
Fitting a coil properly
Prime it — Wet the cotton ports with a few drops of e-liquid before fitting.
Let it rest — Fill, then leave it standing for 10 to 15 minutes.
Ramp up — Start at the bottom of the wattage range and climb gradually.
When to replace
Flavour drop — The first signal that a coil is on its way out.
Burnt taste — The cotton is damaged — replace it straight away.
Gurgling or leaking — A sign the coil is no longer wicking properly.
Reviews
There are no reviews yet.