GeekVape Wenax filter drip tips are the genuine filters that fit onto the mouthpiece of Wenax pods, and they come twenty to a pack, so a single order covers you for a long stretch.
What sets the Wenax filter drip tips apart
Each piece is made to the dimensions of the Wenax pod mouthpiece specifically, so it seats firmly with no modification, no tools and no adapters. Because it is a pure accessory with no resistance and no wattage of its own, nothing on your device needs adjusting after fitting one — you carry on exactly as before.
Twenty filters per pack, so you can swap whenever you feel like it
Sized for the Wenax pod mouthpiece, no modification or tools required
Changing one takes seconds: pull the old one, push a fresh one on, carry on
No need to remove the pod or alter any other part of the device
Accessory only — no resistance, no wattage setting
Supplied in white and orange according to the pack printing
How to use them
Fit a filter onto a clean mouthpiece and use the device as normal. When the one on your mouthpiece is due for a refresh, pull it off and fit a new one from the pack. Keep the remaining filters in the original packaging in a dry spot away from heat and direct sunlight until you need them.
Device compatibility
GeekVape Wenax M1 and its pods, plus the Wenax M2. Note that these are cut for that mouthpiece in particular rather than being a generic part that approximately fits anything.
Who it suits
Wenax M1 and M2 owners who want genuine parts made for their device, and anyone who likes keeping a spare pack in a drawer or a travel bag so a swap takes seconds instead of waiting on a new order.
Order GeekVape Wenax filter drip tips from Sahba Vape. For adult use only.
Type: Filter drip tips that fit onto the Wenax pod mouthpiece
Brand: GeekVape
Pack size: 20 filters
Printed on the pack: Geekvape Filter Drip Tip
Colours: white and orange according to the pack printing
Technical specifications
Resistance: not applicable — accessory with no coil
Wattage: no wattage adjustment needed on the device
Installation: fits directly onto the mouthpiece
Compatible devices
GeekVape Wenax M1 and its pods
Wenax M2
Installation and use
Fit the filter onto a clean mouthpiece
Replace it with a fresh filter from the pack when needed
No need to remove the pod or change any other part of the device
Storage
Store in a dry place away from heat and direct sunlight
Leave the filters in their original packaging until they are used
Package contents
20 x GeekVape Wenax filter drip tip
The coil decides flavour, vapour and how long the setup stays good. A pod has to match your exact device model — visually similar is not the same as compatible.
Before you order
Model — Confirm the device name and generation. Brands sell different pods for different devices under the same family name.
Resistance — The Ω figure sets the draw: higher resistance suits MTL, lower resistance suits open DTL.
Wattage range — It is printed on the coil itself. Stay inside it and the cotton will not scorch.
Mesh or wire — Mesh heats evenly and generally gives cleaner flavour and a longer life.
Fitting a coil properly
Prime it — Wet the cotton ports with a few drops of e-liquid before fitting.
Let it rest — Fill, then leave it standing for 10 to 15 minutes.
Ramp up — Start at the bottom of the wattage range and climb gradually.
When to replace
Flavour drop — The first signal that a coil is on its way out.
Burnt taste — The cotton is damaged — replace it straight away.
Gurgling or leaking — A sign the coil is no longer wicking properly.
Reviews
There are no reviews yet.