Vaporesso Luxe X replacement pods are the refillable pods for the Luxe X series, each holding 5ml and built around an integrated COREX 2.0 mesh coil. Two pods per pack.
What makes the Luxe X pod stand out
5ml of capacity means fewer refills and longer stretches between them. The pod arrives empty, so you fill it with whatever e-liquid you like and drop it in place of a worn pod in seconds.
Integrated COREX 2.0 mesh coil with an evenly spread heating surface for consistent flavour
5ml capacity per pod, one of the roomiest in the pod category
Adjustable airflow by rotating the pod itself, moving from a tight draw to an open one in a single motion
Bottom fill through a rubber stopper that lifts out and seats back easily
Two pods per pack, one in the device and one in reserve
Resistances and matching wattage
0.4ohm at around 32W. The highest power of the three and the most vapour.
0.6ohm at 20 to 25W. A middle range that suits everyday use.
0.8ohm at around 16W. The lowest power of the three and the gentlest on e-liquid and battery.
How to fill it
Lift the rubber stopper on the base of the pod, fill it, then press the stopper firmly back into place. Let the pod rest for a few minutes so the coil saturates properly before the first puff, because that one step is what keeps a pod alive longer.
Device compatibility
Fits the Vaporesso Luxe X, Luxe X2, Luxe X3, Luxe X Pro, Luxe XR and Luxe XR Max.
Who it suits
Anyone with a Luxe X series device who wants a genuine factory-spec spare rather than replacing the whole kit once a pod reaches the end of its life. It particularly suits vapers who like setting airflow by hand and switching between a tight and an open draw as the mood takes them.
Order Vaporesso Luxe X replacement pods from Sahba Vape, available in Kuwait. For adult use only.
Wattage by resistance: 0.4Ω = around 32W / 0.6Ω = 20-25W / 0.8Ω = around 16W
Airflow: Adjustable by rotating the pod
Filling method: Bottom fill through a rubber stopper
Compatibility
Vaporesso Luxe X
Luxe X2
Luxe X3
Luxe X Pro
Luxe XR
Luxe XR Max
Filling and use
Lift the rubber stopper on the base, fill the pod, then reseat the stopper firmly
Leave the pod for several minutes after filling so the coil saturates fully before first use
Set the airflow by rotating the pod to the draw style you prefer
Storage
Keep in a dry place away from high temperatures
Keep out of direct sunlight
Leave inside the original packaging until use
Package contents
2 x Vaporesso Luxe X 5ml refillable pod
The coil decides flavour, vapour and how long the setup stays good. A pod has to match your exact device model — visually similar is not the same as compatible.
Before you order
Model — Confirm the device name and generation. Brands sell different pods for different devices under the same family name.
Resistance — The Ω figure sets the draw: higher resistance suits MTL, lower resistance suits open DTL.
Wattage range — It is printed on the coil itself. Stay inside it and the cotton will not scorch.
Mesh or wire — Mesh heats evenly and generally gives cleaner flavour and a longer life.
Fitting a coil properly
Prime it — Wet the cotton ports with a few drops of e-liquid before fitting.
Let it rest — Fill, then leave it standing for 10 to 15 minutes.
Ramp up — Start at the bottom of the wattage range and climb gradually.
When to replace
Flavour drop — The first signal that a coil is on its way out.
Burnt taste — The cotton is damaged — replace it straight away.
Gurgling or leaking — A sign the coil is no longer wicking properly.
Reviews
There are no reviews yet.