Geekvape E100 Kit

12.000 KD

The Geekvape E100 (Aegis Eteno) Kit combines Aegis-grade durability with pod-kit convenience, pushing 5-100W through the AS-CHIP 3.0 and a single removable 18650 battery. The 4.5ml top-fill pod uses P Series coils with leak-resistant top airflow, while the IP68-rated zinc alloy body shrugs off water, dust and drops.

Category: Brand:
Have a question? Contact us on WhatsApp

Geekvape E100 Vape Kit

The Geekvape E100 Kit, also known as the Aegis Eteno, delivers full mod performance in the size and simplicity of a pod kit. Output runs from 5W to 100W, and the zinc alloy chassis measures 134.50 x 39.56 x 33.00mm with an IP68 rating against water, dust and impact.

The AS-CHIP 3.0 board covers SMART, POWER, BOOSTING, VPC and a full set of temperature control modes, supports resistances from 0.1ohm to 3.0ohm, and adjusts temperature from 100C to 315C. A 1.06-inch TFT colour display keeps readings clear in bright daylight, and the 4.5ml pod uses top filling with a leak-resistant top airflow system and Geekvape P Series coils. Note that the 18650 battery is sold separately.

Key Specifications

BrandGeekvape
ModelE100 Kit (Aegis Eteno)
Output Range5W – 100W
ChipsetAS-CHIP 3.0 – 35A max output current, 7.5V max output voltage
ModesSMART / POWER / BOOSTING / VPC / TC-Ni / TC-Ti / TC-SS / TCR
Resistance Range0.1ohm – 3.0ohm, temperature control 100C – 315C (200F – 600F)
BatterySingle external 18650 battery (sold separately)
Display1.06-inch TFT colour screen
Pod4.5ml (2.0ml TPD version), top fill with leak-resistant top airflow
Coil CompatibilityGeekvape P Series – 0.2ohm (60-70W) and 0.4ohm (50-60W)
DurabilityZinc alloy body, IP68 rated, 0C – 45C operating temperature
Vaping StyleDirect-to-Lung (DTL)
Charging PortUSB Type-C

Package Contents

  • 1 x Geekvape E100 Device
  • 1 x 4.5ml Pod
  • 1 x 0.2ohm Coil (pre-installed)
  • 1 x 0.4ohm Spare Coil
  • 1 x USB Type-C Charging Cable
  • 1 x Spare Parts Kit
  • 1 x User Manual

Available Colours

  • Black, Blue, Beige, Red, Rainbow, Volcanic Grey
  • Product Video Overview
  • Your browser does not support the video tag.

Product Video Overview

First steps with Vape Devices

Most burnt-taste complaints trace back to how a device was set up in its first session. Here is how to prepare Geekvape E100 Kit step by step. The same principles apply across the Geekvape range.

  1. Charge the device with a suitable cable before first use.
  2. Drip a few drops of e-liquid onto the coil's cotton ports before fitting it.
  3. Fill the tank or pod up to the marked line, never past it.
  4. Let it stand for 10 to 15 minutes so the cotton soaks through.
  5. If your device has power control, start at the bottom of the coil's range and climb slowly until the flavour is right.
  6. Set the airflow: narrower for MTL, wider for DTL.

Keeping device and coil in good shape

  • Never let the e-liquid level drop below the coil — that is where burnt hits start.
  • Use a charger matched to the device, and don't leave it plugged in overnight.
  • Keep it out of direct sun and out of a parked car in summer.
  • Wipe the mouthpiece and the connection with a dry cloth now and then.
  • Swap the coil as soon as the flavour fades or turns harsh.

Every draw style has coils and e-liquids that suit it. Not sure whether a tight or open draw is for you? Read MTL or DTL? The Real Difference Between the Two Vaping Styles before you choose.

How are Vape Devices different from disposables?

A refillable device takes fresh e-liquid, new coils and a recharge, so it works out cheaper over time. A disposable arrives filled and charged and is finished once its e-liquid runs out. If you want control over flavour, power and draw, a refillable device is the better fit. New to vaping? Vape Starter Guide for Kuwait - Where to Begin walks through every option.

How long does a coil last in Geekvape E100 Kit?

It depends on the e-liquid, the wattage and how much you vape, but one to three weeks is typical. The first warning sign is fading flavour, followed by a burnt taste. For more on resistance and coil life, see Vape Coils Explained — Ohms, Lifespan and When to Change Them.

How do I choose between Geekvape devices?

Start with the draw you want: tight and cigarette-like, or open with more vapour. Then compare the power range, the tank or pod capacity and the battery. The mAh figure gives a rough idea of how long a charge lasts, and high-power devices drain it faster. You can see every model from this brand on the Geekvape page.

Why does it taste burnt on the first day?

Almost always it is an unprimed coil, power set above the coil's rated range, or a tank running low on e-liquid. Prime the coil, let it rest before use, and always start at the lowest power. The usual mistakes and their fixes are covered in Common Mistakes That Burn Your Coil and Ruin the Flavour.

Which e-liquid suits Geekvape E100 Kit?

It depends on the draw style you run the device at. A tight MTL setup pairs with higher-strength salt nicotine, while an open DTL setup pairs with 60ml freebase at lower strengths. Check the power range and the fitted coil before you choose. The difference is explained in Salt Nicotine or 60ml Freebase? Choosing the Right Strength.

Geekvape E100 Kit is made by Geekvape, a manufacturer of vape devices and the parts that keep them running. That means the device, its pods and its coils can all come from one brand.

Geekvape makes vape hardware, from compact pod kits to full box mods. From the Wenax series we carry the Wenax M, M2 and Q2 kits, K1, M1, Q and S3 replacement pods, and filter drip tips for Wenax devices.

For mod users there's the E100 kit and the Legend 5 from the Aegis series. Coils include the P Series and the Z Series, which fits Zeus and Aegis Legend tanks.

Matching Geekvape gear to your vaping

  • Want a small MTL device? Start with the Wenax kits.
  • Prefer DTL? Look at the E100 or Legend 5.
  • Own a Wenax device? Make sure the replacement pod matches your model: K1, M1, Q or S3.
  • Replacing coils? Match the coil to your tank; the Z Series fits Zeus and Aegis Legend tanks.

More from Geekvape

How your order reaches you

Orders at Sahba Vape are placed on WhatsApp only. Message us for Geekvape E100 Kit, and once your order is confirmed it usually arrives within one to two hours.

  • How to order: WhatsApp only, on +965 55727313.
  • Delivery time: usually one to two hours from order confirmation.
  • Coverage: every governorate — Capital, Hawalli, Farwaniya, Jahra, Ahmadi and Mubarak Al-Kabeer.
  • Delivery fee: varies by area; customer service confirms it when you order.
  • Remote areas: chalets and farms such as Sabah Al-Ahmad, Wafra, Abdali and Khiran are covered at a special rate.
  • Payment: cash on delivery, KNET, Wamd, payment link, Visa and Mastercard.
  • Hours: daily from 8 am to 4 am.
  • Receiving: the recipient must be 21 or over, and the driver may ask for a civil ID.

Exchanges and returns

  • Window: 14 days from the date of purchase, under Kuwait's consumer protection law.
  • Conditions: the original invoice or order number, the product sealed in its original wrapping and unused, and packaging free of tears or scratches.
  • Our mistake: if you receive the wrong item or a clear manufacturing defect, the store covers the full cost of the exchange and delivery.
  • Change of mind: to exchange or return an intact item that matches your order within the 14 days, you pay the courier's return fee.

A device that has been unsealed or used cannot be returned or exchanged, so check Geekvape E100 Kit before you open it.

For an exchange or any question about your order, message us on WhatsApp at +965 55727313 with your order number, a photo of the product and the invoice. The store is in Salmiya, Salem Al-Mubarak Street, Amar Plaza.

Shipping to Saudi Arabia

You can order Geekvape E100 Kit from Saudi Arabia too. Message us on WhatsApp; the shipping cost depends on the weight and size of your order.

  • Transit time: usually 3 to 5 working days, depending on the city and customs clearance.
  • Shipping fee: set by the weight and size of the shipment.
  • Customs: shipments may be subject to customs duty or VAT under Saudi rules, paid by the customer on receipt.
  • Tracking: you get a WhatsApp or email notification as soon as the shipment leaves.
  • How to order: WhatsApp, on +965 55727313.

Reviews

There are no reviews yet.

Be the first to review “Geekvape E100 Kit”

Your email address will not be published. Required fields are marked *

You may also like…

Scroll to Top