GeekVape Z Series Zeus Replacement Coils

5.000 KD

GeekVape Z coils are the genuine replacement heads for the Z (Zeus) tank family — five coils per pack, KA1 mesh, organic cotton and a clean direct-to-lung draw.

What these coils get right

The mesh is drawn from KA1 wire, so it heats fast and spreads that heat evenly across the whole surface — you get balanced flavour without having to push the wattage to the top of the range. The organic cotton re-saturates between draws, which keeps a long chain-vaping session steady instead of thinning out.

  • 5 coils per pack
  • KA1 mesh with organic cotton wicking
  • Press-fit installation from the tank base
  • Four resistances covering 45W to 85W

Every resistance available

  • 0.15ohm — 70-85W. The strongest of the set: dense vapour, warm draw.
  • 0.2ohm — 70-80W. The balance between vapour and flavour.
  • 0.25ohm dual mesh — 45-57W. Easiest on e-liquid and battery, and the best everyday pick.
  • 0.4ohm — 50-60W.

Which tanks they fit

They fit the Z (Zeus) sub-ohm tank, the Z Fli, the P sub-ohm tank and the Obelisk tank, plus the Aegis Legend 2, 3 and 5 kits, the L200, T200, Z200, S100 (Aegis Solo 2) and Max100 (Aegis Max 2).

Worth checking before you order: the Z Max tank runs the M coil family, not Z coils, so the two are not interchangeable.

Who they suit

Direct-to-lung vapers on high-VG freebase e-liquid. Want a head that lasts longer and sips both e-liquid and battery? Take the 0.25ohm. Want everything the Zeus can give? Take the 0.15ohm. Either way, let a fresh coil soak for five minutes after filling before the first draw.

Order GeekVape Z coils from Sahba Vape — in stock in Kuwait with fast delivery.

Category: Brand:
Have a question? Contact us on WhatsApp
BrandGeekvape
TypeReplacement coils for GeekVape Z (Zeus) tanks
Resistances available0.15ohm · 0.2ohm · 0.25ohm · 0.4ohm
Wattage range0.15ohm 70-85W · 0.2ohm 70-80W · 0.25ohm 45-57W · 0.4ohm 50-60W
Coil typeKA1 wire mesh with organic cotton
Mesh structurethe 0.25ohm is a dual mesh build
InstallationPress-fit from the tank base
Compatible devicesZ (Zeus) sub-ohm tank · Z Fli · P sub-ohm tank · Obelisk tank · Aegis Legend 2, 3 and 5 · L200 · T200 · Z200 · S100 (Aegis Solo 2) · Max100 (Aegis Max 2)
Not compatible withZ Max tank (uses the M coil series)
Draw styleDirect-to-lung (DTL)

Package Contents

  • 5 x GeekVape Z replacement coil

Pods and coils: a fitting guide

Whether GeekVape Z Series Zeus Replacement Coils is an empty pod, a prefilled pod or a replacement coil, step one is the same: confirm compatibility. Where a resistance is printed, it sets the draw, with higher ohms for MTL and lower ohms for an open DTL draw.

  1. Match the model name and generation on your device to the pod or coil before fitting.
  2. For a coil or an empty pod, put a few drops of e-liquid on the cotton ports first.
  3. Fill to the max line and let it stand for 10 to 15 minutes so the cotton soaks through.
  4. Prefilled pods are ready to go: click them firmly into place and start.
  5. Make sure the coil is fully seated to avoid leaks.
  6. Begin at the lowest wattage in the coil's range and increase gradually.

When to replace a pod or coil

  • A drop in flavour is the first sign a coil is on its way out.
  • A burnt taste means the cotton is damaged, so swap it straight away.
  • Gurgling or leaking suggests the coil is no longer wicking properly.
  • Dark, heavily sweetened e-liquids and high wattage shorten coil life.
  • Rinsing a coil will not revive it, because saturated cotton does not recover.

The right resistance depends on how you draw. If you are unsure whether you vape MTL or DTL, this explainer settles it.

How do I check that GeekVape Z Series Zeus Replacement Coils fits my device?

Go by the model name and generation printed on your device or its original box. A similar shape is not enough, because connection dimensions change between generations even within one family. If you are still unsure, get in touch and mention your device model.

What does the ohm number on a pod or coil mean?

It is the coil's resistance. Higher ohms give a tighter draw and less vapour, which suits salt nicotine and MTL vaping, while lower ohms give an open draw and more vapour for freebase e-liquid. The details are in Vape Coils Explained — Ohms, Lifespan and When to Change Them.

Do Geekvape pods and coils fit other devices?

As a rule, a pod or coil fits only the devices named in its title or on its box. Some coils are shared across several devices in the same series, in which case the compatible devices are listed in the name. Never go by looks alone, and you can browse the devices themselves in pod systems.

How long does GeekVape Z Series Zeus Replacement Coils last?

It depends on how you use it. Dark, heavily sweetened e-liquids and high wattage shorten coil life, while lighter flavours and moderate power extend it. A prefilled pod is done when its e-liquid runs out, and a coil should be replaced as soon as the flavour drops or tastes burnt. See what burns your coil.

Why does a brand new coil taste burnt?

Usually the cotton was not primed long enough before the first puff, or the wattage is above the range printed on the coil. Drip e-liquid onto the cotton, let it stand after filling, and start at the lowest wattage. Other causes are covered in Common Mistakes That Burn Your Coil and Ruin the Flavour.

Picked GeekVape Z Series Zeus Replacement Coils? It belongs to the Geekvape world of pod kits and box mods. We also stock replacement pods, coils and drip tips for its devices.

Geekvape makes vape hardware, from compact pod kits to full box mods. From the Wenax series we carry the Wenax M, M2 and Q2 kits, K1, M1, Q and S3 replacement pods, and filter drip tips for Wenax devices.

For mod users there's the E100 kit and the Legend 5 from the Aegis series. Coils include the P Series and the Z Series, which fits Zeus and Aegis Legend tanks.

Matching Geekvape gear to your vaping

  • Want a small MTL device? Start with the Wenax kits.
  • Prefer DTL? Look at the E100 or Legend 5.
  • Own a Wenax device? Make sure the replacement pod matches your model: K1, M1, Q or S3.
  • Replacing coils? Match the coil to your tank; the Z Series fits Zeus and Aegis Legend tanks.

More from Geekvape

Ordering and delivery

You order GeekVape Z Series Zeus Replacement Coils with a WhatsApp message, and the driver heads out once the order is confirmed. Delivery covers every governorate in Kuwait.

  • How to order: WhatsApp only, on +965 55727313.
  • Delivery time: usually one to two hours from order confirmation.
  • Coverage: every governorate — Capital, Hawalli, Farwaniya, Jahra, Ahmadi and Mubarak Al-Kabeer.
  • Delivery fee: varies by area; customer service confirms it when you order.
  • Remote areas: chalets and farms such as Sabah Al-Ahmad, Wafra, Abdali and Khiran are covered at a special rate.
  • Payment: cash on delivery, KNET, Wamd, payment link, Visa and Mastercard.
  • Hours: daily from 8 am to 4 am.
  • Receiving: the recipient must be 21 or over, and the driver may ask for a civil ID.

If you need to exchange or return

  • Window: 14 days from the date of purchase, under Kuwait's consumer protection law.
  • Conditions: the original invoice or order number, the product sealed in its original wrapping and unused, and packaging free of tears or scratches.
  • Our mistake: if you receive the wrong item or a clear manufacturing defect, the store covers the full cost of the exchange and delivery.
  • Change of mind: to exchange or return an intact item that matches your order within the 14 days, you pay the courier's return fee.

E-liquids, pods and coils cannot be returned or exchanged once unsealed, and that includes GeekVape Z Series Zeus Replacement Coils.

For an exchange or any question about your order, message us on WhatsApp at +965 55727313 with your order number, a photo of the product and the invoice. The store is in Salmiya, Salem Al-Mubarak Street, Amar Plaza.

Shipping to Saudi Arabia

If you are in Saudi Arabia and want GeekVape Z Series Zeus Replacement Coils, we can ship it to you. Orders go through WhatsApp, the same as orders inside Kuwait.

  • Transit time: usually 3 to 5 working days, depending on the city and customs clearance.
  • Shipping fee: set by the weight and size of the shipment.
  • Customs: shipments may be subject to customs duty or VAT under Saudi rules, paid by the customer on receipt.
  • Tracking: you get a WhatsApp or email notification as soon as the shipment leaves.
  • How to order: WhatsApp, on +965 55727313.

Reviews

There are no reviews yet.

Be the first to review “GeekVape Z Series Zeus Replacement Coils”

Your email address will not be published. Required fields are marked *

Scroll to Top